M.2 SSD Options for the Skylake NUC

The M.2 2280 slot in the NUC6i5SYK supports both PCIe and SATA SSDs. The PCIe SSDs (up to Gen3 x4) can be either NVMe or AHCI. A detailed comparison of Non-Volatile Memory Express (NVMe) and the Advanced Host Controller Interface (AHCI) is beyond the scope of this review, but one of our previous articles provides further information. For the purpose of this piece, it is sufficient to know that NVMe SSDs have advantages in performance over AHCI SSDs. SATA SSDs, as seen from the block diagram in the previous section, are connected to the chipset via a SATA III 6Gbps link.

There are plenty of SSDs compatible with the Intel NUC6i5SYK, but, what does one choose for the best experience? There are decisions to make - PCIe 3.0 vs. PCIe 2.0, NVMe vs. AHCI, PCIe vs. SATA and so on. Obviously, a PCIe 3.0 x4 NVMe SSD is the best in terms of performance, but, it might not be great on the wallet, or even for power consumption. In this review, we are going to look at four M.2 SSD options:

  1. Samsung SM951 256GB PCIe 3.0 x4 NVMe
  2. Samsung 950 PRO 512GB PCIe 3.0 x4 NVMe
  3. Kingston HyperX Predator 240GB PCIe 2.0 x4 AHCI
  4. Mushkin Atlas Vital 250GB SATA 6Gbps

The table below smmarizes the specifications (claimed by the manufacturers) for the various evaluated SSDs. The entries in bold indicate the features corresponding to the tested sample.

Evaluated M.2 2280 SSDs - Specifications
Drive Samsung SM951 Samsung SSD 950 PRO Kingston HyperX Predator Mushkin Atlas Vital
Available Capacities 128GB, 256GB, 512GB 256GB, 512GB 240GB, 480GB 120GB, 240GB, 250GB, 480GB, 500GB
Interface PCIe 3.0 x4 PCIe 3.0 x4 PCIe 2.0 x4 SATA III
Supported Protocols NVMe, AHCI NVMe AHCI AHCI
Evaluated Model MZVPV256HDGL MZVKV512 SHPM2280P2/480G MKNSSDAV250GB-D8
Controller Samsung UBX
S4LN058A01-8030
Marvell Altaplus
88SS9293
SandForce SF-2281VB4-SPC
NAND Samsung 16nm 64Gbit MLC Samsung V-NAND 32-layer 128Gbit MLC Toshiba A19nm 64Gbit MLC MLC
DRAM 512MB 1GB -
Sequential Read 2150MB/s 2500MB/s 1400MB/s 550MB/s
Sequential Write 1260MB/s 1500MB/s 1000MB/s 530MB/s
4KB Random Read 300K IOPS 300K IOPS 117K IOPS 86K IOPS
4KB Random Write 100K IOPS 110K IOPS 70K IOPS 86K IOPS
Endurance 75TBW 400TBW 892TBW (1.7 DWPD) N/A
Street Price (as on date) $200 $318 $300 $90
Warranty OEM / Unknown Five years Three years

The rest of this section will present more information about each of these SSDs as well as a quick look at their CrystalDiskMark scores, when used in the M.2 slot of the NUC6i5SYK. It must be noted that CrystalDiskMark is an artificial benchmark. Nonetheless, it is useful to determine whether the SSDs are operating as per the manufacturer's claimed specifications. It can also help in finding out whether the SSD is connected via the most optimal interface. For example, it can quickly reveal whether a PCIe x4 SSD is inadvertently being operated in the x1 mode (which is entirely possible due to BIOS settings in certain systems).

Samsung SM951 MZVPV256HDGL 256GB PCIe 3.0 x4 NVMe SSD

The SM951 is an OEM-only M.2 2280 SSD. The 256GB variant is a single-sided card with two flash packages, a single DRAM package and the controller on the top side. In the Skylake NUC, the thermal strip attached to the lid is able to make contact with all the chips on the SSD to aid in cooling down the components.

The gallery below presents some photographs of the sample used in our review.

The screenshots below show the CrystalDiskMark v5.0.2 scores of the SM951 in the Skylake NUC6i5SYK with BIOS v0042 on the left and the new development BIOS (v1142) on the right.

As expected, the change from OPI GT2 to OPI GT4 unlocks the full performance potential of the SM951 PCIe 3.0 x4 NVMe SSD. There is no change in the write speeds, but the maximum read rates go up from 1716 MBps to 2231 MBps.

Samsung SSD 950 PRO MZVKV512 512GB PCIe 3.0 x4 NVMe SSD

The SSD 950 PRO uses the same controller as the SM951. This product is available in the retail channel, unlike the SM951. The main selling point here is the V-NAND, which enables higher endurance ratings (up to 400TB of writes). Like the SM951, despite the higher capacity, the 950 PRO is also single-sided. A label across the top prevents the thermal pad on the NUC lid from coming in direct contact with the packages. As we shall see later, our 950 PRO test sample runs a little bit hotter for the same workload as compared to the SM951.

The gallery below presents a couple of photographs of the sample used in our review.

The screenshots below show the CrystalDiskMark v5.0.2 scores of the SSD 950 PRO in the Skylake NUC6i5SYK with BIOS v0042 on the left and the new development BIOS (v1142) on the right.

As expected, and already seen with the SM951, the change from OPI GT2 to OPI GT4 is required in order to take advantage of the full capabilities of the SSD.

Kingston HyperX Predator SHPM2280P2H/480G 480GB PCIe 2.0 x4 AHCI SSD

Kingston was one of the very few vendors to jump on to the PCIe bandwagon for consumer SSDs. The HyperX Predator PCIe 2.0 x4 SSDs adopt the traditional AHCI protocol, and not the NVMe used by the two Samsung SSDs discussed above. The main selling point of these units is the high endurance ratings compared to the Samsung SSDs. Kingston's three-year warranty period, coupled with a 1.7 drive writes per day (DWPD) rating for the 480GB version comes out to an endurance rating of more than 890TBW.

The SSDs come either in a pure M.2 version, or, bundled along with a half-height / half-length (HHHL) adapter to fit traditional desktop motherboards that don't have a M.2 slot. The HHHL adapter also includes a thermal pad on the underside to keep the components cooled. The 480GB version is populated with eight flash packages (four on either side). The pricing on the various available options (240GB and 480GB, with and without the HHHL adapter) is a bit volatile. I have often seen the HHHL bundle available at a lower price compared to the pure M.2 version.

Kingston sent us the 480GB HHHL version for consideration in this piece. Some photographs of the package and the contents are presented in the gallery below. We again have a label covering the packages and preventing the thermal pad on the NUC lid from doing an effective job of keeping the SSD cool.

The screenshots below show the CrystalDiskMark v5.0.2 scores of the Kingston HyperX Predator M.2 SSD in the Skylake NUC6i5SYK with BIOS v0042 on the left and the new development BIOS (v1142) on the right.

The move from OPI GT2 to OPI GT4 is not expected to make any difference to PCIe 2.0 x4 SSDs, and this is proved by our quick test above.

Mushkin Atlas Vital MKNSSDAV250GB-D8 250GB SATA M.2 SSD

Mushkin has been selling SandForce SF2200-based SSDs for a long time. The DRAM-less nature of the controller means that the the board footprint for the SandForce SSDs tends to be small. Due to this, Mushkin has been able to migrate the designs from 2.5" drives to mSATA and now, down to M.2 form factors. The Atlas Vital is the M.2 version of their SF2200-based drive.

The early review samples of the 250GB Atlas Vital that were seeded to the press used the SF2241 quad-channel controller, but our sample had the eight-channel SF2281 controller. There are only two flash packages on board (making it a single-sided design), though it can be seen that the board is designed to accommodate up to eight packages. Mushkin packages the NAND themselves, and there is no guarantee who the vendor is (except that it is MLC flash). The gallery below shows some photographs of the unit used in our review.

The screenshots below show the CrystalDiskMark v5.0.2 scores of the Mushkin Atlas Vital SSD in the Skylake NUC6i5SYK with BIOS v0042 on the left and the new development BIOS (v1142) on the right.

The SSD is presented here as a value proposition, and is not meant to lead the performance charts obviously. The SATA interface is the main limitation, and the OPI GT2 or GT4 rates have no effect on the performance of the SSD.

Do these artificial benchmark numbers have any bearing on the performance of the drive in real-world workloads that might be run on Skylake-U systems? The next few sections attempt to address that question.

 

Introduction SYSmark 2014 Benchmarks
POST A COMMENT

40 Comments

View All Comments

  • BPB - Monday, May 9, 2016 - link

    "We also managed to check out four different SSDs for usage in Skylake-U systems in general (and the NUC6i5SYK in particular)."

    The new NUCs are not capable of using the 950 Pro at full speed. Yes, the specs look like they do, but they don't. The maximum speed supported is 1600MB/s. Page 45 of this doc has the specs:
    http://www.intel.com/content/dam/support/us/en/doc...

    You can also view a discussion at the Intel Community regarding this:
    https://communities.intel.com/message/372201#37220...

    This being the case, which SSD makes the best buy?
    Reply
  • ganeshts - Monday, May 9, 2016 - link

    Please go through the article at least once before commenting. Did you look at the CrystalDiskMark benchmark numbers with the NEW DEVELOPMENT BIOS? Intel has resolved this issue, and the whole point of this review was going into the reasons behind this. Reply
  • BPB - Monday, May 9, 2016 - link

    Sorry, read while at work and only had time to breeze through. I looked for those numbers but didn't see them. Wish I could delete my post... Reply
  • willis936 - Monday, May 9, 2016 - link

    Does this apply to all -U processors? I think far more interesting than NUCs are people with broadwell and skylake -U laptops. Reply
  • ganeshts - Monday, May 9, 2016 - link

    This is applicable to all Skylake-U processors.

    Yes, notebooks are an interesting category that we have tried to cover in this article, but, without numbers to back up. Our impression is that the lower idle power needed for notebooks might make vendors go with the GT2 OPI setting. So, the numbers are likely to be closer to the BIOS v0042 results that we saw in this review. So, yes, it is likely that PCIe 3.0 x4 SSDs can't get full performance with Skylake-U laptops. Of course, vendors have the knob to turn on the higher performance / higher idle power setting, if they want.
    Reply
  • rish95 - Tuesday, May 10, 2016 - link

    You guys wouldn't happen to have power consumption numbers on the PM951, would you?

    It appears the Surface Book's drive is replaceable following a tedious opening procedure, and I've been thinking of replacing the 128 GB PM951 that came with mine with a larger 950 Pro or its successor. The 128 PM drive has terrible slow write performance due to the lack of TurboWrite.

    However, I am concerned that the extra performance the 950 and SM series SSDs offer comes at a huge power penalty, and I certainly wouldn't want to give up the fantastic battery life this device offers.
    Reply
  • ez76 - Monday, May 9, 2016 - link

    How can I tell if my Skylake-U system has an OPT GT2 or OPT GT4 configuration? Reply
  • ganeshts - Monday, May 9, 2016 - link

    Easiest way is to ask the manufacturer. Otherwise, if the system has a M.2 PCIe x4 slot for a SSD, benchmark something like the SSD 950 PRO using CrystalDiskMark.

    Hopefully, after Intel makes this BIOS public, more vendors will put out BIOS updates and spell the OPI link rate out in the change log.
    Reply
  • Junkmail1 - Monday, May 9, 2016 - link

    I went through the article twice and the comments once. Now I'm second guessing that choice! Reply
  • buyme50 - Saturday, May 14, 2016 - link

    "However, the warranty aspect is a bit worrisome, since the SM951 is an OEM model."

    Thank you for mentioning this. I had an SM951 die recently. Newegg's third party seller would not honor the warranty posted (3 years), Newegg would not do anything, and Samsung refused to warranty it. Don't buy the SM951 unless you don't want a warranty and want to risk losing your data.
    Reply

Log in

Don't have an account? Sign up now