While PC VR headsets are fun, no one has especially enjoyed the number of cables required to hook one up. With separate video, power, and data cables, the end result has been that manufacturers have used somewhat unwieldy cables or breakout boxes. However as part of the generalized push towards the second generation of VR headsets, a new industry consortium is coming together today to reduce the requirements to a single cable. Backed by NVIDIA, AMD, Oculus, Valve, and Microsoft, the new VirtualLink standard is a USB Type-C alternate mode that will be able to supply all of the necessary power, video information, and data over a single Type-C cable and connector.

Today’s announcement from the group is essentially a call for participation, announcing the group’s existence and inviting others to get involved ahead of the VirtualLink 1.0 specification. So the consortium and its members are broadly talking about the standard itself, but are not saying anything about products that may implement it. And indeed as of Monday evening as I’m writing up this article, the VirtualLink consortium’s website still isn’t up.


HTC Vive Cable Set

In any case, the rationale for creating a standardized connector is pretty straightforward. A clunky multi-port cable is okay for first-generation early adopter products, but if the consortium members want to push VR adoption, then the setup process needs to be easier to reach the masses. This includes not only reducing the cable down to a single port, but also making these headsets easier to use with laptops, where HDMI ports are uncommon and DisplayPort is primarily picking up penetration through the popularity of the associated USB-C alternate mode. So a standard for a single cable, using the smallest yet most compatible port choice, is going to be the best way forward.

What this amounts to is that the standard is being implemented as a USB Type-C alternate mode. USB-C is the natural choice here, as the wider industry is already consolidating around the port for external connectivity, and the port + cable is designed to carry multiple lanes of data along with significant amounts of power. In fact I was a bit surprised that this required a new alternate mode at all – we already have the DisplayPort alternate mode – but after checking with the consortium, there is a good reason for this.

The official VirtualLink standard calls for 6 lanes of high speed data – 4 DisplayPort HBR 3 channels for video, and a single USB 3.1 Gen 2 channel (2 lanes) for data – along with a mandatory 15W of power. And while you can combine the DisplayPort alt mode with those power requirements, the lynchpin is 4 lanes of video plus the USB 3.1 Gen 2 data channel. By the standard, DisplayPort alt mode replaces all of the USB 3.1 data channels when using a full 4 lane configuration, leaving only the much slower USB 2.0 baseline channels available.

USB Type-C Alternate Modes
  VirtualLink DisplayPort
(4 Lanes)
DisplayPort
(2 Lanes)
Base USB-C
Video Bandwidth (Raw) 32.4Gbps 32.4Gbps 16.2Gbps N/A
USB 3.x Data Bandwidth 10Gbps N/A 10Gbps 10Gbps + 10Gbps
High Speed Lane Pairs 6 4
Max Power Mandatory: 15W
Optional: 27W
Optional: Up To 100W

As it turns out, tucked away in version 1.3 of the USB Type-C cable specification released last year, the USB-IF has made some small but important changes to what alternate modes are allowed to do, which in turn means that new standards are needed to take advantage of these changes. In short, for direct connect devices – that is, devices connected directly to a USB-C port and not going through a hub or other extender/repeater – those devices are now allowed to reconfigure the 4 USB 2.0 pins (A6/A7/B6/B7) after the device handshake. So for the VirtualLink standard, this means that VR headsets can tap these additional 4 pins, giving them the extra flexibility they need in order to simultaneously meet the video, power, and data requirements of a VR headset.


VirtualLink Receptacle Pin Configuration (Color Coded)

Diving a bit deeper, what this essentially means is that the 4 USB 2.0 pins have been turned into another pair of high-speed differential lanes, giving compliant USB-C connectors 6 high-speed lanes overall. Normally these 4 pins are implemented in a USB-C cable as simple unshielded twisted pairs, which is sufficient for USB 2.0 data. However high-speed operation requires shielded differential pairs, which is not part of the base cable specification. But in the case of direct connect devices, they come with their own cable, meaning the usual cable rules can be thrown out the window and vendors can specifically use higher quality cabling to get away with high speed data on these pins.

The net result of all of this is that the VirtualLink standard is a rather forward-looking standard in terms of capabilities. 4 lanes of HBR3 video data alone is equivalent to a DisplayPort 1.4 connector, which is to say that it offers enough video bandwidth for 4K @ 120Hz with 8bpc color. This is more than double the bandwidth afforded to the Rift and Vive via their HDMI 1.3 connectors. I also find it interesting that after favoring HDMI for the first-generation products, this change means the industry is shifting to DisplayPort. DisplayPort of course is royalty free, among its other advantages, however its packet-based data transfer paradigm is very different than HDMI’s classic pixel-based TMDS system, which is an important distinction when you’re talking about how to best fight latency.

Meanwhile a full USB 3.1 Gen 2 data connection means there’s 10Gbps of bandwidth for data transfers between HMDs and the host computer, which right now at least is bordering on overkill. Though I’m very curious what the consortium is doing here (if they’re doing anything at all) to combat the fact that USB 3.1 Gen 2 data is normally only rated to run over 1 meter cables due to faster signal attenuation, which is a rather short cable length for a VR headset and the room scale experiences the vendors are pushing. Otherwise the power standard is a bit more complex; the standard supports up to 27W of power, but only 15W of that is mandatory. Of course the current Vive and Rift consume a fraction of that, but they had to be designed around the limitations of a USB 3.0 Type-A connector to begin with. As headsets become increasingly powerful in their own right – especially with inside-out tracking – a greater power budget will undoubtedly come in handy. (As an aside, the consortium’s announcement doesn’t list voltages here, but 15W & 27W are almost certainly 5V & 9V @ 3A respectively, a common mid-power point for USB-C devices.)

Unfortunately this is the limit to what we know about the specification at this time. As mentioned previously, the consortium’s members aren’t talking about specific implementations quite yet, such as which types of devices the members would like to put VirtualLink-capable USB-C ports on. For desktop PCs the logical choice is video cards – especially if USB-C eventually replaces the DisplayPort connector outright – which is something we’ve seen manufacturers toy with, but not actually reach shipping products. This would also be consistent with the consortium’s goals of making VirtualLink a low-latency port (owing to the comfort requirements for VR).


MSI's Unreleased USB-C Equipped GTX 1080 Ti

The flip side to all of this is that AMD, NVIDIA, and their board partners would need to start implementing either USB 3.1 controllers or USB 3.1 headers on their cards, in order to supply the necessary data connectivity. Which is not too difficult to do, but it’s yet another feature that video cards would need to support. And without going too far down the rabbit hole here, where this ultimately could lead to is that we’re about to see a major shift in the kinds of ports available on video cards, especially if most video cards need to be VirtualLink capable to maximize the number of systems that can be used with VR headsets.

Conversely, laptops should be relatively easy due to their highly integrated nature. USB-C ports are already common there, so it’s just a matter of adding another USB-C alternate mode. However it does call into question whether the consortium will be able to convince laptop manufacturers to adopt the alt mode for large swaths of their product lines (similar to the DP alt mode today), or if it will only be found on high-end gamer-focused laptops.

In any case, this should be a welcome development for the industry as a whole. While VR hasn’t proven to be as immensely popular with consumers as some vendors had hoped, VR headset adoption has shown solid growth and spurred plenty of system upgrades to drive the data-hungry headsets. So anything that further simplifies the process is going to be a welcome move for consumers and hardware vendors alike.

Source: VirtualLink

Comments Locked

50 Comments

View All Comments

  • repoman27 - Wednesday, July 18, 2018 - link

    2m Thunderbolt 3 3A cable outside diameter: 4.6mm
    2m HDMI Premium High Speed cable outside diameter: 7.2mm

    I'm not sure what you're comparing your Thunderbolt cables to that causes you arrive at the assessment that they are "thick and inflexible like you wouldn't believe". 5A cables tend to be slightly thicker than 3A because they require more copper for the Vbus connections, but this spec is only calling for 3A @ 9V.

    Also, the cost of the retimers / redrivers embedded in the cable connectors, assembly, testing, etc. all stay the same regardless of the length of the cable, and the cost of the cable stock itself isn't that exorbitant. So for a function specific cable, they can make it the appropriate length and pack one in with the headset. It would probably only add about $30 to the retail price compared to the current harness they're using.
  • mr_tawan - Wednesday, July 18, 2018 - link

    I've seen some HDMI cable that's smaller than 3mm in diameter in Japan. It's a bit hard to find in my country (the smallest one here would be ~4mm).
  • repoman27 - Tuesday, July 17, 2018 - link

    "By the standard, DisplayPort alt mode replaces all of the USB 3.1 data channels, leaving only the much slower USB 2.0 baseline channels available."

    DP Alternate Mode fully supports a 2-lane DisplayPort HBR3 main link alongside SuperSpeed USB 10 Gbps signaling. It's only when you go to a full 4-lane main link that you're limited to USB 2.0 for data.

    As for cable length, these are function specific and presumably tethered cable assemblies, so they can just go with an active cable design and make it however long they like. Although even for a passive cable, 2.0 m shouldn't be an issue for 5 Gbit/s signaling and 3 A power delivery.
  • unrulycow - Tuesday, July 17, 2018 - link

    I don't see the point in creating a new standard when this could be done with thunderbolt 3 that exists now
  • DanNeely - Tuesday, July 17, 2018 - link

    TB adds a lot to the hardware cost for its higher signaling rates. This uses the cheaper usb3 standard to work
  • doggface - Tuesday, July 17, 2018 - link

    So will this require a specific controller in the laptop/PC?
    I already have a thunderbolt / USB 3.1 G2 capable port in my laptop, will that be enough?
  • Dr. Swag - Tuesday, July 17, 2018 - link

    Because of the use of DP could we potentially see headsets with adaptive sync in the future? That would be neat.
  • tuxfool - Tuesday, July 17, 2018 - link

    You absolutely don't want adaptive sync in headsets. You games etc to absolutely hit the display frequency, no ifs or buts.

    However in the rare instances where that fails you want to temporal warping creating a new fake frame and not a frame with random persistence.

    Another thing that goes against using adaptive sync is that headsets use low pixel persistence, that strobe pixels so they're only lit half of the frametime (it eliminates image ghosting and smearing). This technique presumes a known frametime.
  • boozed - Tuesday, July 17, 2018 - link

    As they say, the great thing about standards is that there are so many to choose from.

    Also see: xkcd 927
  • blkspade - Wednesday, July 18, 2018 - link

    The display throughput makes sense moving forward, the power is perhaps a little over specced. I can't however imagine needing 10gbps of data in/out the headset. You'd probably barely max out half that with audio and inside out tracking.

Log in

Don't have an account? Sign up now