In the world of PC enthusiasts, Lian Li is a name synonymous with top-quality aluminum cases. The company introduced their first PC cases back in the 90’s, when PCs still were a rare find in living rooms. Their minimalistic designs and all-aluminum constructs were a jewel at the time of crude steel cases with beige plastic faceplates. Lian Li today is one of the most reputable case designers and manufacturers on the planet.

Introduction

For decades, Lian Li stood almost completely focuses on the design and manufacturing of top-tier PC cases. A few years ago, it entered the market with SFX-L power supplies, but the demand wasn't quite there. It was not until last year that the company took a significant step towards diversification with the introduction of all-in-one liquid cooling solutions. Apparently, the company found that diversification attempt successful and they are taking yet another step this year, with the introduction of a new SFX power supply this time around.

In today’s review, we are having a look at the SP750, Lian Li’s first-ever SFX PSU that rated at 750 W with an 80 Plus Gold certification. Lian Li certainly takes a peculiar diversification approach here, as their new PSU is not a regular-sized power supply, but an SFX unit, and one with a very high-power output to boot. This is a PSU for compact high-power gaming systems, quite possibly designed to match Lian Li’s own small case designs.

Lian Li SP750 SFX Gold, Fully Modular
Power specifications ( Rated @ 40 °C )
AC INPUT 100 - 240 VAC, 50 - 60 Hz
RAIL +3.3V +5V +12V +5Vsb -12V
MAX OUTPUT 20A 20A 62A 2.5A 0.3A
100W 750W 12.5W 3.6W
TOTAL 750W

Packaging and Bundle

We received the Lian Li SP750 in a cardboard box that is typical for consumer power supplies. There is nothing special about the box but it does provide enough protection to the unit for shipping. The aesthetic design also is relatively simple, with colored edges and based on a picture of the unit itself. It is apparent that Lian Li placed just as much effort as it was needed to create a proper modern packaging and no more than that.

Inside the box, we found a minimalistic bundle, even as far as a PSU is concerned. Aside from a gratitude card, and a very simple user’s manual, Lian Li only included the four black mounting screws. There are no cable ties or any other accessories accompanying this unit.

The Lian Li SP750 is a fully modular PSU and every cable can be detached, including the 24-pin ATX cable. All of the connectors and wires are black. The 24-pin ATX, the EPS, and the PCI Express cables are all individually sleeved as well, but the SATA and Molex connector cables are not. It is obvious that the cables are quite a bit shorter than regular ATX PSU cables, which is reasonable for an SFX power supply. This is a realistic choice considering that the PSU may be installed in very confined spaces where every millimeter counts but could become an issue for users wanting to use the PSU with a regular ATX case. What is strange here is the presence of three PCI Express connectors, because the SP750 clearly has the power output for two middle-range graphics cards but the lack of a fourth connector deprives users from that choice. The cables are supplied in a simple but effective storage pouch.

Lian Li SP750
Connector type Hardwired Modular
ATX 24 Pin - 1
EPS 4+4 Pin - 1
EPS 8 Pin - 1
PCI-E 6+2 Pin - 3
PCI-E 8 Pin - -
SATA - 8
Molex - 4
Floppy - -

 

The Lian Li SP750 750W SFX PSU

External Appearance

Perhaps the greatest feature of the Lian Li SP750 is its size – the company managed to get that high a power output out of a standard 125 × 63.5 × 100 mm / 4.92 × 2.5 × 3.94 in (W×H×D) SFX form factor design, making the PSU compatible with virtually every SFX case in the market. SFX cases designed to fit top-tier graphics cards usually can accommodate an SFX-L PSU as well, yet ensuring compatibility with any SFX-compliant case regardless of its target market definitely is a good thing.

 

Lian Li spent plenty of time worrying about the aesthetics of their new PSU. Parts of the chassis are brushed aluminum, with stickers covering most of the unit’s sides. A beautifully made label with the company logo can be seen right next to the cooling fan. The designer went as far as choosing screws with polished heads.

Despite the compact dimensions of the unit, the designer managed to place a small on/off switch next to the AC cable on the rear side of the PSU. The front side is densely populated with the connectors for the modular cables. The connectors are not color-coded but there is a basic legend printed on the chassis indicating what each connector is for. Besides, it is practically impossible for a user to insert a cable into the wrong connector, as each cable type has a different connector and the connectors are keyed.

Internal Design

The fan responsible for the cooling needs of the SP750 is a low-profile 92 mm product made by Yate Loon, a company whose products we frequently see in PC power supplies. There is nothing too special about this fan, as it has a simple double-bearing engine and a very high theoretical maximum speed of 3000 RPM. Double bearing fans are rare in high-quality PSUs because of their high noise output but they are extremely reliable.

The OEM behind the creation of the Lian Li SP750 is Helly Technology, a company we rarely encounter. The interior of the SP750 is densely packed, which was to be expected for an SFX design with that much power output. The filtering stage starts on the back of the AC receptacle, consisting of two Y capacitors, two X capacitors, and two filtering inductors in total. It is a simple filtering stage, which ought to be just as efficient as necessary.

 

There is only one bridge rectifier, on its own heatsink – if anyone can call that tiny piece of metal a heatsink. The heatsink is but a small flat piece of metal, smaller than the chip itself. Space is an issue in such a design and a larger heatsink would obstruct the installation of the switch but we have the feeling that the designer could do a little better here.

The APFC circuit is textbook, with the active components on the large heatsink across the edge of the PCB, one filtering coil, and a single capacitor. The large 400V/470μF capacitor is made by Nippon Chemi-Con, as all electrolytics in the unit are. There are two primary side inversion MOSFETs that form the heart of an LLC resonant half-bridge design.

On the secondary side, we can see the unit’s relatively huge main transformer surrounded by a thin metallic plate that acts as a heatsink for the 12V generating MOSFETs. As with all modern PSU designs, the 3.3V and 5V lines are derived via DC-to-DC conversion circuits. Most of the capacitors are polymer and are made by Beryl or, for those interested in the full name of the company, Zhao Qing Beryl Electronic Technology Ltd. Although this is the first time we have seen their products in a commercial PSU, Beryl is a reputable manufacturer, with a significant R&D division and global research collaborations on the advancement of, mainly polymer, capacitors.

Read on for our testing of this power supply.

Cold Test Results (~25°C Ambient)
POST A COMMENT

29 Comments

View All Comments

  • erinadreno - Monday, July 12, 2021 - link

    Is it just me or the PCB layout looks like mirrored from Corsair's SF750? Reply
  • DanNeely - Monday, July 12, 2021 - link

    Looking at photos from the review below I don't think so. Off the bat this one has the 2 coils on the side opposite the big capacitor stacked vertically instead of side by side, the heat sinks next ot the big cap are oriented differently; and while it's hard to be sure since al of the images here were taken at more of an angle I think the Lian-Li is more densely packed.

    https://pcper.com/2019/01/corsair-sf750-sfx-platin...
    Reply
  • romrunning - Monday, July 12, 2021 - link

    Thanks for the review! I am not surprised Lian Li entered the SFX market first, because not only do they manufacture a number of custom ITX cases (i.e. ready-made customers), but the SFX PSU market itself has fewer competitors. The ATX PSU market has enough already. Hence, it makes perfect sense to enter the SFX side first.

    The Corsair SF750 mostly dominates the SFX PSU market at the 750W point, so another competitor at that level is desirable. I'll be interested to see if this one made by Helly Technology is just as good, quality/reliability-wise, as the Corsair one.

    The fan is hopefully not a bad choice. I would have wanted one chosen more for quiet operation, because I really treasure a quiet system, especially when ITX cases don't have as much internal volume to "deaden" the sound.
    Reply
  • u.of.ipod - Monday, July 12, 2021 - link

    I think it has less to do with the fan choice and more to do if they set the fan curve aggressive or not, and if they base the fan curve on actual temperature or just general load. Reply
  • romrunning - Monday, July 12, 2021 - link

    The review said: "The 92 mm fan started when our load was just over 200 Watts", so it sounds like a more aggressive curve. I don't know if this unit has a specific "ECO-mode" or configurable semi-passive mode. I know on my SF750, I've yet to hear the fan in the PSU kick on past the initial system power-on. Personally, I'm okay with the fan running, as long as it stays quiet (or at least always less than the system/GPU fans). :) Reply
  • Oxford Guy - Tuesday, July 13, 2021 - link

    'I think it has less to do with the fan choice and more to do if they set the fan curve aggressive or not'

    1. Ball bearing fans are noisy. Single-bearing fans are the worst.

    The only exception I have seen to this rule is some single-speed dual-bearing low-RPM fans designed for high static pressure, which did seem to be very competitive with competing tech (e.g. 800 RPM model from industrial company whose name I can't recall).

    The main reason, as far as I know, for using dual-bearing fans, is for high static pressure situations (i.e. radiators, especially those with airflow high resistance).

    2. How aggressive the fan needs to be depends on various factors that can be controlled by the OEM, such as the quality of the electronics (efficiency) and the quality of the airflow/heatsink aspect. This review suggests that one of the sinks isn't very good and gold is not the best PSU electronics can do.

    The profile isn't just plucked out of the sky. It has to provide adequate cooling under load.
    Reply
  • romrunning - Monday, July 12, 2021 - link

    "What is strange here is the presence of three PCI Express connectors, because the SP750 clearly has the power output for two middle-range graphics cards but the lack of a fourth connector deprives users from that choice"

    ITX boards only have one PCIe x16 slot for a dGPU, so this isn't a problem at all.
    Reply
  • Slash3 - Monday, July 12, 2021 - link

    There are a number of midsize cases that will hold a Micro ATX or full sized ATX motherboard, but still require an SFX power supply, including their own popular O11 Dynamic Mini.

    https://lian-li.com/product/o11-dynamic-mini/
    Reply
  • meacupla - Monday, July 12, 2021 - link

    dGPU is dead anyways, so it doesn't matter. Reply
  • DanNeely - Monday, July 12, 2021 - link

    Only for gaming, not compute. Reply

Log in

Don't have an account? Sign up now